BZNTM - 71123, ALVANIA EP LF GREASE RO
- MSDS: BZNTM
- Manufacturer: SHELL OIL CO
- Product Name: 71123, ALVANIA EP LF GREASE RO
- National Stock Number: 9150-01-178-1221
Product Identification
Product ID:71123, ALVANIA EP LF GREASE RO
MSDS Date:07/06/1991
FSC:9150
NIIN:01-178-1221
MSDS Number: BZNTM
Responsible Party
HOUSTON, TX 77001
US
Emergency Phone: 713-473-9461/800-424-9300(CHEMTREC)
Info Phone: 713-241-2252/4201
Cage: 93508
Contractor
Telephone: 713-473-9461/800-424-9300(CHEMTREC)
Cage: 93508
Ingredients
MINERAL OIL,HYDROTREATED (SEVERE), HEAVY NAPHTHENIC
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: 80-82%
SOLVENT REFINED HYDROTREATED RESIDUAL OIL
CAS: 64742-57-0
Fraction By Weight: 5-6%
SULFURIZED FATTY MATERIAL
CAS: 61790-49-6
Fraction By Weight: 4-11% %
ZINC NAPHTHANATE
CAS: 12001-85-3
RTECS: QK9275000
Fraction By Weight: 1-2%
OTHER ADDITIVES
Fraction By Weight: <8%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY BE MILDLY IRRITATING.
PROLONGED &/OR REPEATED SKIN CONTACT MAY CAUSE DERMATITIS,
FOLLICULITIS, OIL ACNE. HIGH PRESSURE INJECTION INTO SKIN MAY CAUSE
LOCAL NECROSIS; DELAYED ONSET OF PAIN & TIS SUE DAMAGE.
INHALATION:NOT EXPECTED TO BE A RELEVANT ROUTE OF EXPOSURE.
INGESTION:NO SPECIFIC INFORMATION.
Explanation of Carcinogenicity:THIS PRODUCT & ITS COMPONENTS ARE NOT
CLASSIFIED AS CARCINOGENS BY IARC, NTP OR OSHA.
Effects of Overexposure:EYE:MILD IRRITATION. SKIN:DERMATITIS,
FOLLICULITIS, OIL ACNE, LOCAL DAMAGE FROM HIGH PRESSURE INJECTION.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS MAY BE
AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
First Aid
First Aid:IF ANY IRRITATION PERSISTS OR SEVERE, GET MEDICAL ATTENTION.
EYE:FLUSH W/WATER FOR 15 MIN. SKIN:WASH W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING & LAUNDER BEFORE REUSE. INHALED:REMOVE FROM
CONTAMINAT ED AREA. AID OR RESTORE BREATHING AS NEEDED. INGESTED:DO
NOT INDUCE VOMITING. IN GENERAL, NO TREATMENT IS NECESSARY UNLESS
LARGE QUANTITIES ARE INGESTED. HOWEVER GET MEDICAL ADVICE.
Fire Fighting
Flash Point Method:PMCC
Flash Point:399F,204C
Lower Limits:N/AV
Upper Limits:N/AV
Extinguishing Media:USE WATER FOG, DRY CHEM, CO2. DO NOT USE DIRECT
STREAM OF WATER. GREASE FLOATS & CAN BE REIGNITED ON SURFACE OF
WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS & PROPER PROTECTIVE EQUIPMENT. COOL FIRE EXPOSED
CONTAINERS & EQUIPMENT W/WATER.
Unusual Fire/Explosion Hazard:MFR GAVE NO INFORMATION OF MSDS.
Accidental Release
Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA
W/APPROPRIATE CLEANER. PROD IS CLASSIFIED AS OIL UNDER THE CLEAN
WATER ACT. SPILLS ENTERING SURFACE WATER, ANY WATERCOURSES OR
SEWERS THAT LEAD TO SURFACE WATERS & C AUSE A SHEEN MUST BE
REPORTED TO NRC.
Neutralizing Agent:MFR GAVE NO INFORMATION OF MSDS.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH W/SOAP & WATER BEFORE
EATING, DRINKING, SMOKING/USING TOILET FACILITIES. LAUNDER
CONTAMINATED CLOTHING BEFORE RESUE. PROPERLY DISPOSE OF
CONTAMINATED LEATHER ARTICLES,INCLU DING SHOES,THAT CANNOT BE
DECONTAMINATED
Exposure Controls
Respiratory Protection:NOT ORDINARILY REQUIRED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES AS APPROPRIATE
Other Protective Equipment:USE OIL RESISTANT CLOTHING AS NEEDED TO
MINIMIZE SKIN CONTACT.
Work Hygienic Practices:MFR GAVE NO INFORMATION OF MSDS.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V6
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:N/AVAILABLE
Melt/Freeze Pt:M.P/F.P Text:340F,171C
Vapor Pres:N/AVAILABL
Vapor Density:N/AVAILABL
Spec Gravity:N/AVAILABLE
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN, SMOOTH GREASE; SLIGHT HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT AND OPEN FLAME
Hazardous Decomposition Products:COMPLEX MIXTURE OF AIRBORNE SOLID,
LIQUID PARTICULATES & GASES WILL EVOLVE WHEN PRODUCT UNDER GOES
PYROLYSIS/COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF IN AN APPROPRIATE DISPOSAL FACILITY
I/A/W LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.